Tucci Hot Rods unveiled a 2022 Ford Maverick with a twin-turbo V8 engine at the 2026 SEMA show. The Upstate New York shop paired a 5.0-liter Coyote V8 with twin Hellion 62-millimeter turbos, producing up to 1,200 horsepower.

The engine connects to a ZF 8HP70 eight-speed automatic transmission through an LOJ Conversions adapter plate. Power transfers to a rear end sourced from an S550 Mustang via a custom driveshaft. Tucci retained the factory rear suspension but modified the front subframe with custom lower control arms and an S197 Mustang steering rack and knuckles.

The exhaust exits through custom 3D-printed pieces routed via the Maverick's front fender vents. Tucci Hot Rods used 3D scanning to design the lower control arms and determine their geometry. The steering rack required repositioning to clear the engine, and some rear crossmember cutting was necessary.

"When we originally built the truck in 2021 for Ford, it was a pre-production vehicle. The build went over really well, and afterward, we joked that we should Coyote-swap it," owner Dave Tucci told Ford Muscle. "Eventually, that joke turned into a real plan."

Tucci had previously built a 2022 Maverick with a 2.0-liter EcoBoost engine and 3D-printed parts for Ford at the 2021 SEMA show, which the automaker cited as inspiration for the Maverick Lobo.