Dominic Chinea, a former set designer and cast member of the BBC show The Repair Shop, is rebuilding a 1917 Liberty V12 airplane engine for a vintage race car project. He is cutting the V12 in half and welding it back together as a V8 to fit a 1912 Rochet-Schneider chassis. The combined car will be eligible for racing at the Goodwood Members' Meeting, which requires period-correct components and techniques.
The Liberty engine block is cast aluminum from the 1910s, full of impurities that bubble to the surface during welding, contaminating welds and causing cracks. Chinea initially struggled with the top half of the block, which comprises two large pieces. He eventually switched to using wet rags to cool the material while welding very short sections at a time, then repeated the process on the inside. When the outside cracked after he welded the inside, he ran out of ideas and welding gas.
Chinea posted a call for help in the YouTube comments. Experts responded from around the world. A welder from Switzerland with experience on 1920s Bugattis and Bentleys identified excess aluminum oxide as the problem and offered welding tips. An 80-year-old former locomotive engineer advised drilling small holes to prevent cracks from spreading. An ex-fabricator for a hydraulic ram manufacturer suggested building up material with smaller tack-style welds.